Cleaning And Servicing; Cleaning The Motor Block; Cleaning The Blender Attachment - Bosch MMB1 Serie Instrucciones De Uso

en

Cleaning and servicing

■ Pour the contents out of the blender jug
through the opening in the lid (plastic
blender).
or
■ Take the lid off the blender jug.
■ Empty blender jug.
■ Clean all parts, see "Cleaning and
servicing".
Grinding attachment
for chopping up dry, hard ingredients,
e. g. coffee beans, pepper corns, sugar,
poppy seeds, chili, nutmeg.
W Risk of injury from sharp blades/
rotating drive!
Do not remove or attach grinder attachment
until the appliance has been switched off
and the drive has come to a standstill.
X Fig. E
■ Add food, which is to be cut, in the jug.
Fill up to the upper edge of the jug only!
■ Attach lid to the grinding cup and lock by
turning it anti-clockwise.
■ Attach grinder attachment to the drive
on the motor block.
■ Attach grinder attachment by turning it
all the way clockwise. The recessed
grips on the lid must be in alignment
with the cutout on the motor unit.
■ Insert the mains plug.
■ Switch on appliance at a setting with a
high operating speed.
Note: The longer the appliance remains
switched on, the finer the ingredients are
ground.
After using the appliance:
■ Set the rotary switch to f. Wait until
the drive comes to a standstill.
■ Remove mains plug.
■ Turn grinder attachment anti-clockwise
and remove.
■ Remove the cover by rotating it in a
clockwise direction.
■ Empty grinding cup.
■ Clean all parts, see "Cleaning and
servicing".
8
Cleaning and servicing
The appliance requires no maintenance!
Thorough cleaning guarantees a long
service life.
W Risk of electric shock!
Never immerse the motor block in water
and never hold under running water and do
not clean in the dishwasher.
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Tips:
– Preferably clean the parts immediately
after use. This will prevent residue
from drying on and attacking the plastic
(e. g. by essential oils in herbs).
– If processing e. g. carrots and red
cabbage, the plastic parts will become
discoloured by a red film which can be
removed with a few drops of cooking oil.
X Fig. F

Cleaning the motor block

■ Remove mains plug.
■ Wipe motor block with a damp cloth.
If required, use a little detergent.
■ Then wipe dry.

Cleaning the blender attachment

W Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. Clean them with a brush.
Do not clean blade holder in the dish-
washer, but under running water using a
brush. Do not leave in water! The blender
jug, smoothie insert, lid and measuring cup
are dishwasher-safe.
Tip: Pour a little water and washing-up
liquid into the attached blender. Switch on
for a few seconds. Pour out the water and
rinse the blender with clean water.