Festool CXS Manual De Instrucciones página 13

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CENTROTEC tools.
CAUTION
Tool has sharp edges and can cause cutting inju-
ries curing a tool change!
Wear protectiv gloves!
WH-CE
CENTROTEC
®
6-2 6-3 6-4
6-1
6
Attaching the CENTROTEC
Pull the release ring [6-3] forwards.
Attach the tool chuck to the drill spindle [6-4].
Release the ring [6-3].
Detaching the CENTROTEC
Pull the release ring [6-3] forwards.
Remove the tool chuck.
Changing tools
Pull back the green release ring [6-2] to attach
or detach tools with a CENTROTEC shank.
When attaching the tool, rotate until the hexa-
gon shank [6-1] engages in the hexagon holder
on the drill spindle.
Release the ring [6-2].
Chuck BF-FX 8
The chuck BF-FX 8 is used for clamping drill and
screwdriver bits up to 8 mm chuck diameter.
BF-FX 8
7-2
7-3
7-1
7
Attaching the chuck BF-FX 8
Attach the chuck to the drill spindle [7-5].
Pull the release ring [7-3] forwards.
Turn until the hexagon pin [7-4] on the chuck
engages in the hexagon socket holder in the
drill spindle.
Push the chuck all the way onto the drill spindle.
Release the ring [7-4].
Detaching the chuck BF-FX
Pull the release ring [7-4] forwards.
Remove the chuck.
Changing tools
Turn the clamping sleeve [7-2] anticlockwise to
open the clamping jaws [7-1].
 The arrow on the spindle indicates the opening
direction.
Insert the tool into the chuck.
CAUTION
Risk of injury
Clamp the tool centrally in the chuck!
Turn the clamping sleeve [7-2] clockwise to
clamp the tool.
7-4
7-5
13
Tabla de contenido
loading

Este manual también es adecuado para:

MxcXs-as

Tabla de contenido