Working With The Machine - Festool CXS Manual De Instrucciones

Ocultar thumbs Ver también para CXS:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Angle attachment XS-AS
The angle attachment XS-AS (partly accessories)
allows you to work (drill, fasten) vertically in rela-
tion to the longitudinal axis on the machine.
XS-AS
8
-
1
8
Fitting the angle attachment XS-AS
Pull the green release ring [8-1] forwards.
Fit the angle attachment to the drill spindle [8-
2].
Turn the attachment until is engages in the re-
quired position.
 You can engage the angle attachment in 16 dif-
Consider the pictures on the fold-out page.
Switch on/off
The switch [1-6] is an on/off switch (press = ON, re-
lease = OFF).
 The speed of the machine depends on how far
the ON/OFF switch is pressed in.
 When the ON/OFF switch is released, the work-
ing spindle (chuck) stops immediately.
The LED bulb [1-10] lights up when the ON/OFF
switch is pressed [1-6].
Bit store
Bits or bit holders are inserted sideways into the bit
store [1-9].
Warning signals [10]
Machine shuts down, light flashes twice:
Battery pack is empty.
Change the battery pack.
14
8
-
2

Working with the machine

ferent positions.
Release the ring [8-1].
Removing the angle attachment XS-AS
Pull the green release ring [8-1] forwards.
Remove the angle attachment.
Changing tools
The tools can be fixed on the angle attachment via
CENTROTEC tool chuck, the chuck BP-XS 8 or di-
rectly into the drill spindle.
Tool holder in the drill spindle
Bits can be inserted directly in the hexagon socket
holder on the drill spindle [9-1] to shorten and re-
duce the weight of the machine.
9
9-1
Machine shuts down, light does not flash:
Machine is overheated or has been overloaded.
Reduce the machine load.
Allow the machine to cool down.
STOP
1
2
10
Tabla de contenido
loading

Este manual también es adecuado para:

MxcXs-as

Tabla de contenido