Auto Attendant; Programming The Telephone; Language; Olume - RCA 25425 Manual De Uso

Programming the Telephone

Auto Attendant

Turn on auto attendant function by pressing the ATTENDANT button, the blue indicator
will light. For detail information on auto attendant setting, please refer to Auto Attendant
section.
Programming the Telephone
When programming the phone, if at any time you wish to discontinue or stop program-
ming, press the "Exit" button. Also , whenever you have made a program selection by press-
ing the Sel/Save button the display will shown "OK" for several seconds then will return to
the MAIN MENU prompt display.

Language

Set the display language to show messages in either English, Spanish, or French.
1. Press the MENU button while in standby mode. The cursor in the display points to SET
LANGUAGE.
2. Press the SEL/SAVE button.
3. Use the VOL (+ or -) buttons to scroll up or down to ENGLISH, ESPANOL, or FRANCAIS.
The default is English.
4. Press the SEL/SAVE button to save.
Volume
The ringer, speaker, and handset/headset volume is set independently with the
VOL (+ or -) buttons. There are 8 possible volume settings per mode. The volume indicator
scale is displayed during volume adjustment.
Ringer Volume
1. While the phone is on the hook, press the VOL (+ or -) button. The phone rings
according to the current setting.
2. Tap the VOL (+ or -) buttons to adjust the volume one level at a time. The phone stores
the setting after the last button press.
NOTE: To turn the ringer off, on, or change the ringing pattern, see Setting the Ringer Tone.
Speakerphone, Handset, and Headset Volume
While the phone is in use, during the desired mode, press the VOL (+ or -) buttons until you
reach a comfortable listening level. The phone stores the setting after the last button press.
14