Temporarily Stopping Image Capture - Sony IPELA PCSA-CXA55 Manual De Instrucciones

unlocked. In such cases, perform the above
step for securing the suction cup again.
To release the suction cup
Turn the suction cup lever in the opposite
direction (RELEASE direction).
Notes
• Do not forcibly remove the suction cup by
inserting your fingers or other objects
between the suction cup and the TV monitor.
Doing so may damage the suction cup.
• When the camera unit is not mounted, always
attach the protective cover to the suction cup.
The adhesive strength of the suction cup will
decrease if its surface is dirty or scratched.
• If the surface of the suction cup becomes
dirty, gently wipe the surface with a soft,
non-abrasive cloth that has been moistened
with water. In addition, adhere to the
following precautions.
– Do not use detergents and other cleaning
solutions.
– Make sure that the suction cup is
completely dry before attaching it again.
– To prevent damage, do not allow water to
enter the inside of the TV monitor.
22

Temporarily Stopping Image Capture

Temporarily
Stopping Image
Capture
Slide the lens cover lever to the left (when
facing the front of the camera unit).
If a conference is conducted with the lens
cover closed, only a black screen will be
visible to the remote party.
When the lens cover is closed, the Home
menu appears as follows.
AAA IP:XXX.XXX.XXX.XXX
Home
Closed
Camera
Connect
Note
When the power supply to the camera unit is
disabled, the Home menu appears as follows.
AAA IP:XXX.XXX.XXX.XXX
Home
OFF
Camera
Connect
Operate the Remote Commander to restore
power supply to the camera unit.
Ready to connect.
Ready 5/11/2008 13:00
Ready to connect. Ready 5/11/2008 13:00