Dräger X-zone 5500 Instrucciones De Uso página 50

Establishing a wireless connection
4.2.3 Forming a new group
A maximum of 15 group devices can be assigned to a main
device. Group affiliation is saved in the corresponding X-
zone 5500 until the group is terminated.
To form a new group:
1. Gather all the devices for the group in one area.
2. Switch on the devices (see" Switching on the instrument"
on page 44).
3. Select an X-zone 5500 as the main device.
4. Press the key on the main device to open the menu.
OK
5. Select and confirm .
6. Select and confirm
group devices.
Display on main device:
Grouping LED:
red-green flashing slowly.
For all non-grouped X-zone 5500 within range of the main
device the grouping LED flashes green.
Display on the potential group device:
Grouping LED:
green flashing slowly.
7. For all required group devices, press the
succession to add the X-zone to the group.
50
to start the search process for
1:55
1
03833112.eps
03933112.eps
or key in
OK
Display on the group device:
Grouping LED:
lit in green.
8. Press the key on the
OK
main device to end the
search process.
Grouping is completed.

Group monitoring is activated.

Display on main device:
Grouping LED:
lit in red-green.
9. If necessary, disable group monitoring provisionally (see
chapter 4.2.7 on page 52).
10. Set up devices at the location of use.
#1
X-zone 1
04033112.eps
#0 2
2
05133112.eps
Dräger X-zone 5500