Key Assignment Of The Dräger X-Zone 5500; Status Led Overview - Dräger X-zone 5500 Instrucciones De Uso

17 Key assignment of the Dräger X-zone 5500
The following key functions refer to the keys of the Dräger X-zone 5500.
Action
Pressing key once
Pressing and holding key for 3 sec
Pressing and holding and
Pressing key once
Pressing and holding key for 3 sec
3 Press the key 3 times
3 sec. press of and 3 x
18

Status LED overview

Battery LED
(Indicates the battery status.)
Colour LED status
off
red
red/green
green
red
red
red
red
red/green
green
green
Communication LED
(Indicates the connection status if several devices are coupled via wireless connection or communication cable.)
Colour LED status
green
green
red
red
Dräger X-zone 5500
Meaning
Acknowledges device defects and pre-alarms.
Switch from OFF to STANDBY mode or switching from STANDBY to ON mode.
key for 3 sec Switches to OFF mode.
On the main device: Expand group/End search run.
On the main device: Reduce group size.
On the group device: Deletes the grouping information.
On the main device: Activate group monitoring.
On the main device: Provisionally disable group monitoring.
key
Device mode
off OFF mode
on ON/STANDBY mode
ON/STANDBY mode
OFF mode
ON/STANDBY mode
in charging cradle
Group monitoring
off/device not grouped
on
activated
provisionally disabled
Device not grouped
on
activated
provisionally disabled
Key assignment of the Dräger X-zone 5500
Meaning
Device is switched off.
Charge less than 33%.
Charge between 33% and 66%.
Charge greater than 66 %.
Battery pre-alarm
Battery main alarm; Dräger X-zone 5500 switches off after
10 sec.
Attempt to switch on in OFF mode when the battery is empty (on
for 10 s).
X-zone 5500 is charging, charge less than 33%.
X-zone 5500 is charging, charge between 33% and 66%.
X-zone 5500 is charging, charge greater than 66%.
X-zone 5500 is fully charged.
Meaning
At least 1 other X-zone 5500 coupled via wireless connection or
cable detected.
On the main device: Device connected to group.
On the group device: Device connected to main device.
X-zone 5500 connected to group.
No additional X-zone 5500 coupled via wireless or cable
connection detected.
Alarm on main device: At least one device in the group is not
connected.
Alarm on group device: No connection to main device.
On the main device: At least one device in the group is not
connected.
On the group device: No connection to main device.
73