Test The Collar; Function And Response Table - Petsafe PBC17-16369 Manual Del Producto

Test the Collar

1. Plug the charger into the Spray Bark Collar (4A, 4B).
2. Ensure the spray port is pointed away from your face. While
the charger is plugged in, press and hold the on/off button.
3. Continue to hold the on/off button while unplugging the
charger from the Spray Bark Collar. A yellow LED will appear.
4. Release the on/off button. After a 2 second delay, the
following will begin: the Spray Bark Collar will emit a tone
then release spray. Then, it will sound the normal power off
tone and turn itself off.
5. The test can be stopped at any time by pressing the
on/off button.

Function and Response Table

Function
Spray collar is turned on
Spray collar is turned off
Spray collar is on
Spray activation
Low battery condition
Low spray warning
Testing
No cartridge
Spray collar is on/
cartridge is empty
(will not spray)
Turning collar on/
cartridge is empty
(will not spray)
8
LED Light Response
Green LED illuminates
Red LED illuminates
Green LED light flashes once every 5 seconds
None
Red LED light flashes 3 times every 5 seconds
Yellow LED flashes once every 5 seconds
and the battery is good
Yellow LED flashes 3 times every 5 seconds
and the battery is low
Yellow LED light appears
Red and green LED's alternate flashing for 5 seconds,
the collar will turn off
Yellow LED flashes once every 5 seconds
and the battery is good
Yellow LED flashes 3 times every 5 seconds
and the battery is low
Yellow LED flashes 2 times
petsafe.com
4A
4B
Beep Response
Beeps low to high
Beeps high to low
None
None
None
None
Beeps
4 beeps
None
2 beeps