1.1 Markings and Symbols
The following markings and international symbols are used on the equipment or within this user guide:
Caution, Read the User Guide.
Risk of electric shock.
Highlights actions or procedures which, if not
performed correctly, may lead to personal injury or
death.
Highlights actions or procedures which, if not
performed correctly, may lead to damage to this
product.
Highlights actions or procedures which, if not
performed correctly, could lead to electric shock.
Read the User Guide
NITROGEN (N
DO NOT BREATHE
NITROGEN (N
)
2
Asphyxiant in high concentrations. No odour.
Slightly lighter than air. Ensure adequate
DO NOT BREATHE
NON-FLAMMABLE
Asphyxiant in high
concentrations. No odour
COMPRESSED
ventilation. Breathing 100% nitrogen will produce
Slightly lighter than air.
GAS
Ensure adequate ventilation.
Breathing 100% nitrogen will produce
immediate unconsciousness and death
immediate unconsciousness and death due to lack
of oxygen.
NON-FLAMMABLE COMPRESSED GAS
1.2 Approvals
SAFETY and ELECTROMAGNETIC COMPATIBILITY
EN 61010-1: 2001
EN 61000-6-1:2007
EN 61000-6-2:2005
EN 61000-6-3:2007
EN 61000-3-2:2006
EN 61000-3-3:1995
Including:
Amendment A1:2001
Amendment A2:2006
LISTED
LABORATORY
EQUIPMENT 84NA
2
)
2
This equipment has been tested and complies with the following European Standards:
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory use -
Part 1: General Requirements
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential,
commercial and light-industrial environments
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for
residential, commercial and light-industrial environments
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
(equipment input current <= 16 A per phase)
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <=
16 A per phase and not subject to conditional connection.
This equipment has been tested to and complies with the following standard:
UL 61010-1 2nd Edition 2005, Electrical Equipment for Measurement, Control and Laboratory Use; Part 1: General
Requirements.
CAN/CSA C22.2 No.61010-1 2nd Edition 2004, Electrical Equipment for Measurement, Control and Laboratory Use; Part 1:
General Requirements.
Wear ear protection
Pressurised components on the system
Remote control. Generator may start automatically
without warning.
Conformité Européenne
When disposing of old parts always follow local
waste disposal regulations.
Waste electrical and electronic equipment should
not be disposed of with municipal waste.
Use a fork lift truck to move the generator.