Tabla de contenido
Idiomas disponibles
Idiomas disponibles
www.trapp.com.br
Fixed hammers
Hammers are provided with 2 dented corners
which position can be changed as they wear out.
To change their position, remove the fixing screws
as in the figure below.
TRF 700F
ATTENTION!
Use
!
TRAPP ORIGINAL
PARTS.
TRAPP does not undertake
responsibility for eventual
damages caused to the
equipment, neither for
accidents that may occur
due to the use of non-
original parts.
Techtening of the screws
Due to impact and constant vibrations
caused by chopping and grinding of
materials, it is a natural tendency for
screws to loosen.
Check them periodically, and if necessary
tighten the loose screws. Be careful not to
overtighten as they may strip.
Attention!
Always turn off shredder and unplug it before
servicing or cleaning.
53
Tabla de contenido
