Edirol UA-3 Manual Del Usuario página 9

Installing the driver (Windows Me)
* If you are using a Windows 2000 machine, refer to p. 9, if Windows 98, refer to p. 9.
1. Turn on the power of your computer and start up Windows, and use a USB cable to connect the UA-3 to your
computer.
2. When Windows detects the UA-3 and the Add New Hardware Wiz-
ard dialog box appears, make sure "Automatic search for a better
driver (Recommended)" is selected, then click [Next].
Some time may be required until this dialog box appears
3. The search for the driver starts.
4. When the correct driver is found, driver installation starts.
5. When a dialog box informing you that driver installation has finished
appears, click [Finish], and restart Windows.
After installing the driver, refer to Specifying the audio input/output device (p. 12) and select the device Windows uses.
* Depending on your computing setup, there may be a short wait after the driver is installed until the
device is recognized.
Installing the driver (Windows 2000)
* If you are using a Windows Me machine, refer to p. 9, if Windows 98, refer to p. 9.
1. Turn on the power of your computer and start up Windows.
2. Use a USB cable to connect the UA-3 to your computer.
The UA-3 is recognized to the computer and the driver is installed all automatically.
3. After installing the driver, restart Windows.
Installing the driver (Windows 98)
* If you are using a Windows Me machine, refer to p. 9, if Windows 2000, refer to p. 9.
Installation must be performed in the order of the USB Composite Device driver, USB Human Interface De-
vice driver, and then the USB Audio Device driver. Use the following procedure to perform the installation.
1. Turn on the power of your computer and start up Windows. Insert the Microsoft Windows CD-ROM into your
CD-ROM drive, and use a USB cable to connect the UA-3 to your computer (p. 8).
UA-3
Since some computers are sold with the contents of the Microsoft Windows CD-ROM already
in the hard disk, a Microsoft Windows CD-ROM may not have been included. If this is the case,
you will be able to install the driver without the Microsoft Windows CD-ROM
Connections and driver installation (Windows)
9