Edirol UA-3 Manual Del Usuario página 112

Appendices
Recording the line inputs (analog recording)
Make connections as shown in the following diagram.
MIDI sound module/Audio amplifier
(Cassette, record players)
LINE OUT
Audio cable
Set to "INPUT + GUITAR/MIC"
Use the Line input adjustment slider to adjust the input level. If the LED above the slider lights red, use the slider
to lower the input level. You
can get it before causing the LED to light.
112
Monitor
speakers
Audio cable
LINE
LINE
IN
OUT
UA-3
In order to record at the best
possible audio quality, do not
connect a guitar or mic to the
"GUITAR" jack or "MIC" jack.
Lower the "GUITAR/MIC" slider
to the lowest position.
will be able to record with higher audio quality if you use the slider to adjust the level so it is as high as you
Computer
LINE IN
USB
port
USB cable
USB
port
Stereo
Headphones
Signal flow
If you change the position of
the Recording input select
switch, you should turn down
the volume of any monitor speaker
system that is connected.