Deleting The Usb Audio Device Driver - Edirol UA-3 Manual Del Usuario

Connections and driver installation (Windows)
2. Right-click the copied file "Alright(.wav)", and select [Play] or [Properties] from the menu
that appears.
3. Click the [Preview] tab, and then click the
The sample data will begin playing.
When the Recording input select switch is set to DIGITAL, it is
not possible to play back audio data from your computer. Set the
switch to INPUT + GUITAR/MIC.
Did you hear the sample data?
If the sample data played correctly, your computer and the UA-3 are connected correctly, and the drivers have been
installed correctly. If the data did not play correctly, refer to Troubleshooting (p. 21). Troubleshooting contains mate-
rial to help you find and correct such problems.
This completes all connections and driver installation for the UA-3.

Deleting the USB Audio Device driver

If re-installing the USB Audio Device driver
If installation of the USB Audio Device driver was terminated before completion
Use the following procedure to delete the driver that is already installed.
1. Use a USB cable to connect the UA-3 to your computer.
2. Click the Windows [Start] button, and select [Settings] - [Control Panel].
3. In [Control Panel], double-click [System] to open the System Properties dialog.
4. Click the [Device Manager] tab.
5. Double-click [Sound, video and game controllers] to see a list of the devices.
6. From the list, select USB Audio Device, and click [Remove]. In the Confirm Device Removal dialog box,
click [OK]. If USB Audio Device is not displayed, proceed to step 8.
7. Make sure that USB Audio Device is not in the Sound, video and game controllers list, and click
[Close] to close the System Properties dialog.
8. Follow the steps 1. – 4. again, and double-click [Universal Serial Bus controllers] to display the list of
devices.
If is displayed for the USB-compatible device icon:
Select the [USB Composite Device] icon, and click [Remove]. In the Confirm Device Removal dialog
box, click [OK]. As in the step 7., close System Properties.
If there is no USB-compatible device icon, or if
Simply close System Properties.
If you are using Windows Me and
Simply close System Properties.
14
The explanation provided here is for an average Windows system. Depending on your com-
puter, some of the folder names may be different.
button.
is not displayed:
is displayed: