Edirol UA-3 Manual Del Usuario página 111

Digital transfer from CD/MD/DAT to your computer (digital recording)
Make connections as shown in the following diagram.
Monitor speakers
LINE IN
Set to "DIGITAL"
* Set the recording sampling frequency of your recording application to 48 kHz if you are using DAT, or
to 44.1 kHz if you are using MD or CD. For details refer to your application's manual.
UA-3
CD
DIGITAL OUT
Optical digital cable
Audio cable
LINE DIGITAL
OUT IN
UA-3
Computer
USB
port
USB cable
USB
port
Stereo
Headphones
Signal flow
Appendices
• Since the UA-3 supports SCMS (p.
5), audio data containing copy pro-
tected song that is input to the digital
connector cannot be recorded by the
UA-3 to your computer. (It will be
output from the line output jacks and
the headphone jack.)
• If you change the position of the
Recording input select switch,
you should turn down the volume
of any monitor speaker system
that is connected.
• If the Recording input select
switch is set to DIGITAL, audio
data from your computer will not
be output.
• If you wish to input from the Line
input jacks, Mic input jack or
Guitar input jack, refer to p.112 --
115. On the UA-3, it is not possible
to mix the signal from these inputs
with the signal from the digital
input connector and record them
together.
111