Joystick Operation (Driving And Braking) - Vermeiren LiNX 400 Manual De Instrucciones

EN
NL
2. Tap zone
Move the slider to the left/right to decrease/increase the sensitivity zone of the
o
tap field.
3. Left hand mode
Tap this selection key to switch this mode OFF or ON. By switching on, the location
o
of the operating keys switches from the right to the left side of the screen.

Joystick operation (driving and braking)

4.6
Operating the joystick in a specific direction will move the electric
wheelchair in that direction. The speed of movement depends on the
displacement of the joystick. If the joystick is pushed/pulled to
maximum displacement, the speed will be maximal (within the selected
drive mode).
By moving the joystick to its central position (neutral) during driving, the
brakes will start working until the wheelchair stops:
 For gradual braking, move the joystick slowly
 For a quick stop, release the joystick; the wheelchair will stop as
quickly as possible.
Make sure that the joystick is in neutral (central) position when pressing the on/off
button, otherwise the electronics will be locked.
After switching the operating console ON by the ON/OFF button, the joystick stays in
the central position for at least five seconds. The console has been programmed this
way for technical and safety reasons. If joystick and ON/OFF button are activated at
the same time, the steering unit is locked and will only unlock after switching
completely OFF.
Make sure that the free-wheel lever is in braking position BEFORE switching the
wheelchair ON. Electromagnetic brakes do NOT function if the wheelchair is in free-
wheel mode. This is indicated on the operating console. Driving is not possible.
To prevent unintended changes of the settings, the operating keys disappear during
operation of the joystick. As soon as the joystick is in neutral position, the keys
appear again.
12
LiNX 400
2019-01
Operating console functions
Joystick movements