Navigation; Settings Button - Vermeiren LiNX 400 Manual De Instrucciones

Navigation

4.4
There are 2 main menus to view on the touchscreen:
 S-menu for adjusting the body position, see §4.8.
 D-menu for changing the drive functions, see §4.9.
Each main menu has separate submenus.
Once the operating console has been switched ON, you can navigate through the
screens/menu in two ways:
1. by pressing navigations buttons (see Figure 1, 2+3).
o Press navigation button I (2) shortly, to select a main menu (S, D...)
o Press navigation button II (3) shortly, to select a submenu (S1, S2...)
2. by swiping with your finger on the touch screen
o Swipe up/down to select a main menu (S, D...) and tap to view it.
o Swipe left/right to select a submenu (S1, S2...) and tap to view it.
Use the set key to get an overview on the navigation structure.

Settings button

4.5
The settings button (K) is displayed in each menu screen. With this button, the screen view
can be changed, a popup screen can be opened, and settings can be changed.
 To toggle between full screen view and menu-scroll view, tap the settings button
shortly.
 To open the pop-up screen, hold your finger on the settings button for 4 seconds.
This pop-up screen can also be opened/closed by pressing menu button I (2) for 4
seconds.
Settings button and pop-up screen
D1
2
K
9
LiNX 400
2019-01
Operating console functions
H
L
M
EN
NL