Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting USB devices
Only connect your USB devices after initial set-up of
your new PC. This will prevent unnecessary confusion
during installation. These devices can normally be
connected during operation. Please refer to the
operating manual for your peripheral device.
• The PC's USB power outputs are protected by a fuse (limited power
source as per EN60950). This ensures that, if there is a technical
defect in the PC, the peripheral devices connected to the affected
sockets will not be damaged.
Normally, a choice of several connection sockets
Ensure that the plug and the socket fi t together
precisely in order to avoid any damage to the
contacts. Due to the arrangement of the contacts, the
plug will only fi t into the socket in one position.
− Connect devices (printer, scanner, camera, etc.) to the corresponding
socket
/
9
Where possible, always connect your devices to the
port that they were originally installed on. Otherwise
you will be assigned a new ID and the drivers will
need to be reinstalled.
Connecting the audio output / headphones / speaker
boxes
Connect active speaker boxes for playback or an audio connection cable
for recording. Read the operating instructions for your stereo to fi nd out
which input you need to use (usually Line In or Aux).
− Connect the cable to the green socket
with the 3.5mm stereo jack.
Connecting the headphones
Connect the headphones/earphones here.
− Connect the cable to the green socket
with the 3.5mm stereo jack.
AFTER SALES SUPPORT
+1 866 633 4660
USA
.
11
/
is available.
9
11
on the back of your PC
15
on the front of your PC
12
www.medionusa.com
USA
Connecting
23
Capítulos
Tabla de contenido
