Short/Long Messages; Gps Report - Kenwood NEXEDGE NX-230EX Manual De Instrucciones

■ Receiving
A calling ID or text message will appear when a Status call is
received. Press any key to return to normal operation.
■ Reviewing Messages in the Stack Memory
1 Press the key programmed as [Stack], or press and hold
the key programmed as [Selcall], [SDM], [Status+SDM],
[Status], or [Selcall + Status] to enter Stack mode.
• The last received message is displayed.
2 Press
• Message types are identifi ed as follows:
I: Caller ID, S: Status Message, M: Short Message
• Press and hold
display information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3 Press
• To delete the selected message, press
confi rm the deletion, press
• To delete all messages, press and hold
1 second. To confi rm the deletion, press

SHORT/LONG MESSAGES

Received short messages are displayed the same as Status
messages and are stored in the same stack memory.
To send short messages, and to send and receive long
messages, you must connect the transceiver to a PC. Ask your
dealer for details.

GPS REPORT

To send your location data. GPS data can be manually
transmitted by pressing the key programmed as [Send the GPS
data], or by accessing the Menu {Page12}. If set up by your
dealer, GPS data may be automatically transmitted at a preset
time interval.
/ to select the desired message.
for 1 second or press
to return to normal operation.
to cycle the
or
or .
or
or
. To
for
.
19