Idiomas disponibles
Idiomas disponibles
NEUTRAL
Put the motor stop lever on neutral (see label). This separates the motor from the gears. You will
now be able to push the scooter.
Put the motor stop lever on drive. This will again interlock the motor and gears. You will now be
able to again drive the scooter.
Motor stop lever
L
Never put the scooter in neutral while you are driving.
L
To prevent the motor from overheating, never pick up the electronic drive before stopping the
motor/gears.
SEAT
Remove seat (Fig. C)
Pull the seat lever
Turn the seat
a little bit and lift the seat out the adjustment bar
Release the seat lever
Locking the seat in place (Fig. C)
Do the reverse when you want to replace the seat.
Pull the seat lever
as far down as it will go.
When you hear the seat lock in place, the seat lever
pulled upward, the seat has not been locked in place yet.
Swivel seat (Fig. C)
Pull the seat lever
Turn the seat
in the desired direction.
Release the seat lever
Check that the seat is firmly secured.
Depth adjustment (Fig. C)
Pull the seat depth adjustment lever
Move the seat
forward or backward over the seat depth rails
To lock the seat in place, let go of the lever
Swivel the seat a little until it locks in position.
Check the seat is locked securely.
upwards.
.
up and at the same time put the seat
upwards.
, and the seat will always stop after 20°.
upwards.
Instruction manual Carpo 3 / Carpo 4
.
on the adjustment bar
must be in a horizontal position. If it is still
.
once the seat
has reached the desired position.
Last updated: 2018-07
Neutral
Drive
and press
3
Capítulos
