Disc Operation; Usb Playback - Sony XAV-602BT Manual De Instrucciones

The picture does not fit in the screen.
 The aspect ratio is fixed on the DVD.
There is no picture/picture noise occurs in the
rear monitor.
 A source/mode which is not connected is
selected. If there is no input, no picture appears
in the rear monitor.
 The color system setting is incorrect.
 Set the color system to [PAL] or [NTSC]
according to the connected monitor (page 23).
 The picture of the rear view camera is displayed
on this unit.
 No picture appears in the rear monitor if the
picture of the rear view camera is displayed on
this unit.
Sound
There is no sound/sound skips/sound cracks.
 A connection has not been made correctly.
 Check the connection between this unit and the
connected equipment, and set the input selector
of the equipment to the source corresponding to
this unit.
 The disc is defective or dirty.
 Installation is not correct.
 Install the unit at an angle of less than 45° in a
sturdy part of the car.
 The MP3 file sampling rate is not 32, 44.1, or 48
kHz.
 The WMA file sampling rate is not 32, 44.1, or 48
kHz.
 The AAC file sampling rate is not 44.1 or 48 kHz.
 The MP3 file bit rate is not 48 to 192 kbps.
 The WMA file bit rate is not 64 to 192 kbps.
 The AAC file bit rate is not 40 to 320 kbps.
 The unit is in pause/reverse/fast-forward mode.
 The settings for the outputs are not made
correctly.
 The DVD output level is too low (page 17).
 The volume is too low.
 The ATT function is activated.
 The format is not supported (such as DTS).
 Check if the format is supported by this unit
(page 29).
Sound is noisy.
 Keep cords and cables away from each other.

Disc operation

The disc does not play.
 The disc is defective or dirty.
 The disc is not playable.
 The DVD is not playable due to the region code.
 The disc is not finalized (page 30).
 The disc format and file version are incompatible
with this unit (page 29, 30).
 Press  to remove the disc.
38
GB
MP3/WMA/AAC/Xvid/MPEG-4 files do not play.
 Recording was not performed according to the
ISO 9660 level 1 or level 2 format or the Joliet or
Romeo expansion format (DATA CD), or the UDF
Bridge format (DATA DVD) (page 30).
 The file extension is incorrect (page 30).
 Files are not stored in MP3/WMA/AAC/Xvid/
MPEG-4 format.
 If the disc contains multiple file types, only the
selected file type (audio/video) can be played.
 Select the appropriate file type using the list
(page 15).
MP3/WMA/AAC/Xvid/MPEG-4 files take longer
to play than others.
 The following discs take a longer time to start
playback.
 a disc recorded with a complicated tree
structure.
 a disc recorded in Multi Session/Multi Border.
 a disc to which data can be added.
The disc does not start playing from the
beginning.
 Resume playback or multi-disc resume playback
(page 27) has taken effect.
Certain functions cannot be performed.
 Depending on the disc, you may not be able to
perform operations such as stop, search, or
repeat/shuffle play. For details, refer to the
manual supplied with the disc.
The soundtrack/subtitle language or angle
cannot be changed.
 Use the DVD menu instead of the direct selection
button on the remote commander (page 12).
 Multilingual tracks, multilingual subtitles, or
multi-angles are not recorded on the DVD.
 The DVD prohibits changing.
The operation buttons do not function.
The disc will not eject.
 Press the reset button (page 5).

USB playback

Items cannot be played via a USB hub.
 Connect iPod/USB devices to this unit without
USB hub.
Items cannot be played.
 Reconnect the USB device.
The USB device takes longer to play.
 The USB device contains large-sized files or files
with a complicated tree structure.
The sound is intermittent.
 The sound may be intermittent at a high bit rate
of more than 320 kbps.