DENTSPLY Cavitron G139 Instrucciones De Uso página 14

Shut down at the end of the day
1. Flush the DENTSPLY Cavitron built-in ultrasonic system
according the dental unit manufacturer's instructions.
2. Remove any ultrasonic inserts and the Steri-Mate handpiece.
Clean and sterilize the handpiece and all inserts used during the
procedure (refer to the Infection Control information booklet and
the Cavitron Ultrasonic Inserts Directions for Use for cleaning
and sterilizing instructions).
3. Clean and disinfect the handpiece cable assembly by applying a
medically approved non-immersion type disinfectant solution,*
carefully following the instructions provided by the solution
manufacturer. To clean the cable, generously spray disinfectant
solution on a clean towel and wipe the cable and connector.
Discard used towel. To disinfect the system, generously spray
disinfectant on a clean towel and wipe the cable and connector.
Allow the disinfectant solution to air dry.
4. Clean and disinfect all surfaces of the dental control head
according to the manufacturer's instructions.
5. Place the cable connector into the handpiece holder for storage.
6. Turn off the power and water to the dental unit.
*NOTE: Water-based disinfection solutions are preferred. Some alcohol-
based disinfectant solutions may discolor the handpiece cable and connector.
ENGLISH • 12