Idiomas disponibles
Idiomas disponibles
Contents
1. Priority instructions .................................................. 4
2. Definitions and pictograms ...................................... 5
EN
2.1. Definitions ....................................................... 5
2.2. Pictograms ...................................................... 5
3. Description and marking .......................................... 5
3.1. Presentation.................................................... 5
3.2. Operating principle.......................................... 6
3.3. Markings ......................................................... 6
4. Associated equipment ............................................. 6
5. Use .......................................................................... 6
5.1. Product configurations .................................... 7
5.1.1.
WL configuration .................................... 7
5.1.2.
RS configuration .................................... 7
5.2. Installation....................................................... 7
5.3. Connecting a power supply ............................ 7
5.4. Connecting a sensor ....................................... 8
5.4.1.
WL configuration .................................... 8
5.4.2.
RS configuration .................................... 8
5.5. Connecting an accessory ............................... 8
5.6. Connecting relays and alarms ........................ 8
5.7. Starting up the sensors and accessories ........ 8
5.8. Starting up the product ................................... 8
5.8.1.
WL configuration .................................... 9
5.8.2.
RS configuration .................................... 9
5.8.3.
Checking the status of the relays
and the network ..................................... 9
5.9. Operation ........................................................ 9
5.9.1.
Operation in basic configuration ............ 9
5.9.2.
Operation in multiple and extended
configuration .......................................... 9
5.9.3.
Adjusting the associated sensor(s) ........ 9
5.9.4.
Single-sensor main display .................. 10
5.9.5.
Tare function ........................................ 10
5.9.6.
Peak load function ............................... 11
5.9.7.
Multi-sensor main displays .................. 11
5.9.8.
Main menu ........................................... 12
5.9.9.
Information menu ................................. 12
5.9.10. Parameters menu ................................ 13
5.9.10.1. Mode management
5.9.10.2. General sub-menu ................ 14
5.9.11. Recording menu .................................. 14
5.9.12. Language menu ................................... 14
5.9.13. Network menu ..................................... 15
4
sub-menu ............................. 13
5.9.13.1. Pairing sub-menu ................. 15
5.9.13.2. Configuration sub-menu ....... 15
5.9.14. Thresholds menu ................................. 16
5.9.15. Overload .............................................. 17
5.9.16. Sensor batteries low ............................ 18
5.10. Turning the product off ................................ 18
5.11. Deinstallation .............................................. 18
6. Prohibited uses ...................................................... 18
7. Maintenance and periodic verification ................... 18
7.1. Other verifications ......................................... 18
8. Transport and storage .......................................... 18
9. Product disposal and environmental protection..... 18
10. Technical specifications ....................................... 19
11. Regulations and standards .................................. 19
12. Troubleshooting ................................................... 21
13. Declaration of conformity ..................................... 21
1. Priority instructions
1. Before installing and using this device, it is essential
that you read these instructions and comply with its
instructions for safe and effective use. A copy of
these instructions must be made available to all
operators. Additional copies can be obtained upon
request from Tractel
.
®
2. Do not use this device if any of the labels affixed to
the device or any of its accessories, or any of the
markings on it as shown at the end of this manual
are no longer present or legible. Replacement
labels can be obtained upon request from Tractel
and must be affixed before continuing to use this
device.
3. Make sure that any operator of this device is familiar
with its operation and capable of applying the
safety requirements for the task to be performed.
These instructions must be made available to
these operators. Protect your equipment from
uncontrolled intervention.
4. This device must be installed and put into operation
in conditions that ensure the safety of the installer in
accordance with applicable local regulations.
5. Every time the device is used, first inspect its
condition and that of any accessories used with the
device. Never use a device that does not appear to
be in good condition.
6. Return the device to the manufacturer for servicing
if there are any visible issues.
7. Protect the device from any shocks.
8. Tractel
shall not be liable for the operation of this
®
device in an assembly configuration not described
in these instructions.
®
