Idiomas disponibles
Idiomas disponibles
EN
FRONT OF MOWER FACES THIS DIRECTION
FORWARD TRAVEL
REVERSE TRAVEL
ZERO-RADIUS TURN
N= NEUTRAL POSITION
D= DRIVE POSITION
R= REVERSE POSITION
Direction of arrows indicate direction of mower move-
ment
Left steering control lever
Right steering control lever
The left steering control lever controls the left rear drive
wheel and the right steering control lever controls the
right rear drive wheel.
Tilting both steering control levers outwards from the
NEUTRAL position will engage the parking brake.
Tilting steering control levers in towards the NEUTRAL
position will disengage the parking brake.
English
Note: The further a steering control lever is moved
away from the neutral position, the faster the drive
wheel will turn.
See the Zero-turn Mower Driving Practice section for
steering instructions.
5.1.3 ELECTRIC TAKE OFF (ETO) SOCKET
The mower can be used with other attachments
designed specifically for this unit, such as an accessory
blower. The attachments can be powered by the mower
with the ETO socket (1) in the front part of the mower
and mounted to the front hitch (2) if the attachment has
the matched port.
5.1.4 ANTI-SCALP WHEELS
These anti-scalp wheels are designed to minimize
scalping when mowing on rough, uneven terrain. After
setting the cutting height, adjust the anti-scalp wheels
(2) so they extend below the deck but do not contact
the ground. They should always be at least 1/4" to 3/4"
below the deck (1). With the mower sitting on a flat level
surface, the wheel position can be adjusted up or down
as needed from 3/4" to 1-3/4" from the anti-scalp wheels
(2) to the ground.
16
1
2
2
1
