Idiomas disponibles
Idiomas disponibles
4. Make sure all nuts and bolts are torques to the
mentioned values above.
4.2
INSTALL THE SEAT
1. Position the seat assembly over the seat panel and
align holes.
2. Install two bolts on the front of the seat and tighten
securely with a T40 wrench applying torque within
the range of 14 - 18 ft-lbs (20 - 25 N·m).
3. Pull the seat adjustment lever to move the seat
forward and expose the two mounting holes in the
back. Install the two bolts and tighten securely.
English
4. Connect the wire connector to the seat plug located
behind the seat. Ensure the plugs are securely
attached.
5. Secure the cables into the clips on the panel.
4.3
INSTALL THE TAILGATE OF THE
REAR STORAGE BIN
1. Insert the nylon bushing and the rotation shaft to the
pipe of the rear tailgate.
13
EN
