AXXAIR GA10-M1 Manual De Instrucciones página 37

English
- 37 -
INNOVATIVE ORBITAL SOLUTIONS
For informations :
Adjustment thumbwheel: 1 unit = 0.1 mm
After adjusting the stopper, use the locking
Stop lock handle
handle to fix the position.
For "V" Bevels:
To adjust the height of the bevel, move the stop.
To do this, turn the thumbwheel in either direction to increase or decrease the height of the bevel.
The vernier value is equal to the chamfer height.
4mm
For "J" Bevels:
The height of the bevel is determined by the selection of the roller mounted on the milling head. Adjusting
the stop allows the length of the root face at the end of the bevel to be changed.
The value of the vernier is equal to the length of the root face.
4mm
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - [email protected] - www.axxair.com
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363