Idiomas disponibles
Idiomas disponibles
English
- 25 -
INNOVATIVE ORBITAL SOLUTIONS
Dress properly with clothes adapted for the job. Do not wear loose clothing or jewellery. They could be
caught up in moving parts.
Secure the machine on a workbench or into the ground via the security leg in order to work safety.
Check if your machine is damaged. Before using the machine ALWAYS check that no parts have been
damaged in order to be sure that it can perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its
operation.
In case of a machinery blockage, it is most necessary to pull out the power cable in order to stop
supplying the motor or push the SAEX emergency red button if it use.
Make sure that the lighting does not produce a stroboscopic effect that might make a moving tool stand still
(eg halogen or LED bulbs).
Unplug the machine when not in use, before maintaining, and when changing accessories.
Avoid unintentional starting. Do not carry plugged-in tool with finger on switch. Be sure the switch is off
when plugging in.
If you are using an electric motor make sure that the voltage is the appropriate.
IMPORTANT:
The recommendations are about personal protection equipment. They are only applicable for the described
machines used in this manual. Any requirements of additional equipment resulting from outside ambient
conditions or the closeness of other machines are not taken into account.
These recommendations do not resign in any way the agency responsible for its statutory obligations
regarding health and regarding safety at work to his employees.
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - [email protected] - www.axxair.com
Join
experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
