Idiomas disponibles
Idiomas disponibles
INNOVATIVE ORBITAL SOLUTIONS
9. Using of the machine
Mounting the motor on the bevelling machine
WARNING: Carefully clean supporting surfaces before mounting the motor on the motor support plate.
Using the brush supplied.
The motor is mounted on the tool holder plate by sliding it into the grove provided for this purpose.
-
The motor is held in position by two pre-mounted plates which ensure that the angle transmission
-
makes contact with the bearing face of the tool holder plate.
Depht adjustment / Workpiece guide
-
Secure the pipe to be beveled so that it is flushes with the roller without letting the milling head
come into contact with it.
-
Loosen the knurled diameter adjustment knob
Place the retractable plunger of the punch lever on the notch at the middle of the workpiece guide.
-
Place the roller against the outer wall of the pipe.
-
Tighten the diameter adjustment knob, making sure that the position of the retractable plunger
-
remains on the mark for guiding the workpiece.
Adjustment is now complete. Perform this adjustment each time the diameter is changed.
Join
experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
6.0mm Allen wrench
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - [email protected] - www.axxair.com
English
- 33 -
WARNING
