Idiomas disponibles
Idiomas disponibles
TROUBLE SHOOTING
Fault
The blades are blocked.
The capacitor is damaged.
Light on, but
The motor is damaged.
motor does not
The internal wiring of motor is cut off/
work
disconnected. An unpleasant smell
may be produced.
Apart from the above mentioned, check the following:
Both light and
Light damaged.
motor do not
Power cord loose.
work
Outlet and the air ventilation entrance
are not tightly sealed.
Oil leakage
Leakage from the connection of
U-shaped section and cover.
The blade, if damaged, can cause
vibrating.
Vibration
The motor is not tightly fastened.
The cooker hood is not tightly fixed.
The distance between the cooker
hood and the cooker top is too large.
Insufficient
suction
Too much ventilation from open doors
or windows.
The fixing screws are not tight
The
enough.
machine
The hanging screws are not tight
inclines
enough
Cause
EN-11
Solution
Replace capacitor.
Replace motor.
Replace motor.
Replace lights.
Connect the wires as per the electric
diagram.
Take down the outlet and seal with glue.
Take U-shaped section down and seal
with soap or paint.
Replace the blade.
Fasten the motor tightly.
Fixed the cooker hood tightly.
Readjust the distance.
Choose a new place to install the
appliance or close some doors / windows.
Tighten the fixing screw and make it
horizontal.
Tighten the hanging screw and make it
horizontal.
