Idiomas disponibles
Idiomas disponibles
(
À
+
Indicates pressing a button
Indicates
pressing a button.
l
P
9
for an extended period of time.
IGNAL
> S
Signat Sound/Signal Beep (The sound of button operation)
E
You can select to have different signal sounds output from the center speaker whenever
you press a button. You can also set the volume of the signal sound.
SIGNAŁ SOUND | Sets the operation sound as <Signal Sound>
|
(a different sound for each operation).
Sets the operation sound as <Signal Beep 1>.
Sets the operation sound as <Signal Beep 2>.
Sets the operation sound as <Signal Beep 3>.
Turns off the operation sound.
Adjusting the volume:
-
Note:
e A sound is output when the power is turned
Sa, - Increases the volume
on or off only if "SIGNAL SOUND" is set.
Vs
Gan
: Decreases the volume
_v PseT~
aS
(Main unit; TES
)
(Adjustable range: LEV 1 to LEV 3)
Making It Easier to Hear Voice Directions from the Car Navigation System
(In future use)
You can select to have this unit reduce its volume when the car navigation system is
giving voice directions.
Connect a car navigation system (sold separately).
MUTING ON | Decreases the volume of this unit to "0" (silence) when the car navigation
|
system gives voice directions.
MUTING HALF | Decreases the volume of this unit by approximately 1/10 when the car
|
navigation system gives voice directions.
MUTING OFF | Does not change the volume of this unit when the car navigation system
gives voice directions.
e When the car navigation system gives voice directions, the message "MUTING xxx",
indicating the navimute setting, is displayed.
|
47
A
E
