Idiomas disponibles
Idiomas disponibles
Indicates pressing a button
cý Indicates
pressing a button.
( o )
|
p
p
for an extended period of time.
SP TYPE
SEL
Set Each Speaker Type and whether They are Present or Not
FRONT : LARGE
OPT+C NONE
SUR : LARGE
10
©
e
te
te
OPT-C SMALL
(Front speaker)
10
(Surround speaker)
(Subwoofer)
(Center speaker, sold separately)
YES
: When using a subwoofer.
NO `: When not using a subwoofer.
Note:
o If "SMALL" or "LARGE" is set for "OPTeC" (the optional center speaker), the attached center
speaker of this unit is not operated. Otherwise, "NONE" should be set.
SP LEVEL
SEL
Adjust the Speaker Output Levels
Using a test signal, adjust the audio output of each speaker so that the volume level
from every speaker sounds equal. (Adjustable range: 0 to ~ 12 dB)
The test tone sounds for 2 seconds at each speaker in the following sequence:
|
(center)
To adjust the test signal
(left front)
<0
|
Volume:
(subwoofer) CSW)
x
VOLUM
`
<
VEN
Press
(left surround) Cr
<
9 (right surround)
EE. ` a
O | FRONT-LOdB
||
CENTEROdB
|++|
FRONT«R 0 dB
Gn
Increases level.
1
t
[V]: Decreases level,
SUBWOdB
|++|
LSUROdB
|+|
ReSURO dB
Notes:
e The test signal is not output from a speaker for which "— œ" was set. (œ page 45)
The speaker output levels can not be set during the separate front/rear settings. (= page 53)
SS
Adjust the Speaker Delay Times
Set a delay for the output from center and surround speakers so that the sound from the
other speakers reaches the listening position at the same time as the front speakers.
(Adjustable ranges: Center speaker Oto +4 ms
Surround speaker 0 to +15 ms)
[V]: Decreases delay.
Note:
e The center speaker can be adjusted only while playing back Dolby Digital software.
D In-
