Idiomas disponibles
Idiomas disponibles
Indicates pressing a
button for an extended
period of time.
Indicates pressing
a button.
Setting the Clock
The clock uses a 12-hour display.
© (JSP)
CAR Hold
E (2 seconds) | @ 12:00
(2) Switch between the hours and minutes displays, and set
both.
: Selects the hours display,
which begins to blink.
REA
ETA
Cat
v_ TUNE
(Main unit. SE y
: Selects the minutes display,
which begins to blink.
(Main unit: 23, )
: Increases the number in the
selected display.
(Main unit: TAN)
Indicates operations
that can only be
performed through
the main unit.
(3 Finalize the time setting.
CER
© 10:35
e The clock begins to run.
To display the time:
AER
NS] Press
Press the button repeatedly
until the time is displayed.
e "ADJUST" will be displayed
when the clock is not
adjusted.
v PeSET.
: Decreases the number in the
selected display.
(Main unit: VE)
Opening/Closing the Panel
_
e The panel opens.
(When the panel is open, this unit
is muted and you can not operate
except for some buttons.)
TLT
Press
To close the panel:
S Hold
(1 second)
Q
TILT
S Press
5
e The panel closes and returns to
the angle of tilt that you have
previously set.
;
e The panel closes completely,
and the tilt setting is cancelled.
You can adjust the tilt of the panel to make it easier to see.
Hold
Note:
e The panel will open to the angle of tilt that you have
previously set whenever you turn the ignition switch to
"ACC" or "ON".
e To change the tilt of the panel, hold the
button down for more than 1 second.
<The tilting mechanism has three tilt
positions.>
Caution:
e Do not attempt to manually move or
stop or strike the panel or the
center speaker.
Notes:
e If no button is pressed for about
20 seconds, the panel closes
automatically and returns to the
angle of tilt that you have previously
set.
e The panel closes completely when
the ignition switch is turned to "OFP".
ME]
CO-DVR909U
E
N
G
L
|
S
H
8
27
