Idiomas disponibles
Idiomas disponibles
545150017
MAINTENANCE
To enjoy years of outstanding performance from your appliance, make sure you perform the following
maintenance activities on a regular basis:
Keep exterior surfaces clean.
•
Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
•
While cleaning your unit, be sure to keep the area around the burner and pilot assembly dry
•
at all times. If the gas control is exposed to water in any way, DO NOT try to use it. It must be
replaced.
Airflow must be unobstructed. Keep controls, burner and circulation air passageways clean.
•
Signs of possible blockage include: gas odor with extreme yellow tipping of flame, the
appliance does not reach the desired temperature, the appliance glow is excessively uneven,
the appliance makes popping noises.
Spiders and insects can nest in burner or orifices. This can damage the appliance and render it
•
unsafe for use. Clean burner holes by using a heavy duty pipe cleaner. Compressed air may
help clear away smaller particles.
Soot deposits can lead to a fire hazard. Clean the dome with warm soapy water if soot deposits
•
develop.
Note: in a salt-air environment (such as near the sea), corrosion occurs more quickly than normal.
Frequently check the corroded areas and repair them promptly.
SERVICING
Please consult your dealer for servicing this appliance and replacement of its parts. The
•
servicing of the appliance shall be carried out only by authorised personnel.
Caution: do not use unauthorized parts or components for this appliance, only use original
•
equipment replacement parts and components. The use of unauthorized parts or components
will void the warranty and can create an unsafe condition.
STORAGE
Between uses:
Turn control knob OFF
•
Turn gas cylinder OFF
•
Store the appliance upright in an area sheltered from direct contact with inclement weather (such as
rain, sleet, hail, snow, dust and debris). If desired, cover to protect exterior surfaces and to prevent
build up in air passages.
During periods of extended inactivity or when transporting:
EN
16
