Idiomas disponibles
Idiomas disponibles
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions
for use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Package contents/parts list
(Fig. A)
1 x bed area (1)
1 x sun roof (2)
2 x long rods (3)
2 x cross rods (4)
4 x feet (5)
4 x long connecting rods (6)
1 x short connecting rod (7)
4 x connectors (8)
2 x triangle connectors (9)
1 x instructions for use
Technical data
Dimensions:
Bed area: approx. 106 x 20 x 75cm (W x H x D)
Total dimensions (bed area and sun roof):
approx. 106 x 85 x 75cm (W x H x D)
Max. capacity: 60kg
60
Date of manufacture (month/year):
12/2023
Intended use
The product is not intended for commercial use.
The product can be used as an indoor and
outdoor bed for dogs.
Safety instructions
Important: Read these assembly instruc-
tions carefully and keep them in a safe
place!
Risk of death!
• Never leave children unattended with the pack-
aging materials. There is a risk of suffocation.
• Keep children away from the product.
• The product is not a toy or a climbing appara-
tus! Make sure that persons, especially children,
do not stand on the product or pull themselves
up on it. The product can topple over.
Risk of injury!
• Make sure the product is properly stabilised
before using it!
• Place the product on a solid and level surface.
Do not place near stairs.
• Do not place hazardous items, such as can-
dles, on or near the product.
• Check the product regularly for wear. Check
regularly to make sure all connections are
tight! The product should only be used if it is in
perfect condition!
• The product may only be used for its intended
purpose.
• Do not exceed the maximum carrying capacity.
Assembly
1. Remove the packaging and lay all the parts of
the product out on the floor (Fig. A).
2. Put the long rods (3) and the cross rods (4)
through the loops on the bed area (1).
3. Connect the ends of the long rods and the
cross rods with a connector (8) each (Fig. B).
Note: See Figure B. The small opening to insert
the sun roof must be facing upwards.
4. Put a foot (5) under each of the connectors
(Fig. C).
The dog bed is now completely assembled.
5. Slide the long connecting rods (6) through the
loops on the sun roof (2) (Fig. D).
6. Put the short connecting rods (7) in the centre
of the sun roof and put each of the ends of the
connecting rods in a triangle connector (9), as
shown in Figure E.
7. Put on the sun roof by placing the ends of the
connecting rods into the openings provided
for them (8a) on the connectors (8) (Fig. F).
GB/IE
7
