Scope Of Delivery / Parts List; Technical Data; Correct Use; Safety Notes - Zoofari IAN 96390 Instrucciones De Montaje

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following assembly instructions. Use the product
only as described and only for the given areas
of application. Keep these instructions safe.
When passing the product on to a third party,
always make sure that the documentation is
included.

Scope of delivery / Parts list

(figure A)
1 x Base plate (1)
1 x Plate with a patch and a movable ball (2)
1 x Oval plate (3)
1 x Arched plate with two movable balls (4)
1 x Cat cave (5)
1 x Board (6)
2 x Posts, 40 cm (7)
1 x Post, 40 cm; with screw thread (8)
1 x Post, 27 cm (9)
1 x Post, 17.5 cm; with screw thread (10)
1 x Rope (11)
3 x Screws, long (12)
2 x Screws, short (13)
2 x Thread mounts (14)
1 x Screw with cover cap (15)
1 x Allen key (16)
1 x Assembly instructions

Technical data

Overall dimensions: approx.
120 x 70 x 55cm (H x W x D)
Maximum load capacity: 6kg

Correct use

This article is not designed for commercial use.
The article serves as a scratching post for indoor
areas.

Safety notes

Important: read through the instruc-
tions carefully and keep them for
future reference!

Danger to life!

• Never allow children to play with the
packaging material unsupervised.
There is a risk of suffocation.
• The product is not a piece of climbing or play
equipment. Make sure that persons, particu-
larly children, do not stand on the product
or pull themselves up on it. The product can
tip over.

Risk of injury!

• Ensure that the article is stable before use.
• Stand the article on a level and stable sur-
face; do not stand it close to steps.
• Do not place any hazardous objects such as
candles on or close to the article.
• Check the article regularly for wear.
Carry out regular checks that all screw
connections are tight. The article may only
be used if in perfect condition.
• The article may only be used for the intended
purpose.
• Do not exceed the maximum load capacity.
Assembly (figure B)
1. Remove the packaging and lay all the parts
of the article on the floor.
2. Assemble the article in accordance with
figure B.
Note: the article can be placed with its
back against a wall in order to reduce
the risk of it tipping over.

Cleaning and care

Always store the article in a dry and clean
condition in a temperature-controlled room.
Only vacuum the article and do not clean it with
aggressive cleaning agents.
GB/MT 11