Oase InScenio FM-Master Home Cloud Instrucciones De Uso página 22

Operating conditions indicated by the Status LED
LED colour
–
Green
Yellow
Red
Service button functions
Operation
Press and hold for 5 seconds until a
short beep confirms reset
Press and hold for 15 seconds until a
continuous beep confirms reset.
22
LED status Description
Off The InScenio FM-Master Home, Cloud is switched off.
Lit A direct connection is established.
Flashing slowly A connection to a WiFi network is established.
(1× per second)
Lit The InScenio FM-Master Home, Cloud starts or is in firmware update
mode.
Flashing fast A firmware update is in progress.
Flashing slowly The InScenio FM-Master Home, Cloud is attempting to establish a con-
(2 s on, 1 s off) nection to the router. This can take several minutes.
• If no connection is found, check the WiFi connection. If necessary,
Flashing An internal error has occurred; recommended procedure:
• Disconnect the power supply, wait for approx. 10 seconds, then re-
• If the error remains active, ...
Description
Resetting the network settings
• The network settings are reset to the delivery default settings.
• All other settings are maintained (e.g. device list and device set-
• During resetting, the status LED first flashes quickly in green, then
Reset to factory default settings
• All settings are reset to the delivery default settings.
• During resetting, the status LED first flashes quickly in green, then
• A short signal sounds after 5 seconds. Still, continue to hold the
reduce the distance between the InScenio FM-Master Home, Cloud
and the router.
establish the power supply.
− use the "OASE Control" app to check for new firmware. If neces-
sary, install new firmware.
− reset the device to its factory settings and restart it. (→ Service
button functions)
− contact the OASE service.
tings).
lights up in yellow.
lights up in yellow.
button down until you hear a continuous beep.