Directions Before Starting; Seat Adjustment - Dolmar RM-72.13 H Manual De Instrucciones

Ocultar thumbs Ver también para RM-72.13 H:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

– the operator is seated or the parking brake is engaged.
b) The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in "neu-
tral";
– the operator leaves his seat with the transmission in "neutral" but
without engaging the parking brake;
– the grass-catcher is lifted or the stone-guard is removed when the
blades are engaged;
– the parking brake is engaged without disengaging the blade;
– the speed change is activated (
(
4.22) with the parking brake on.

5.3 DIRECTIONS BEFORE STARTING

Before starting to mow, it is necessary to carry out several checks
and operations to ensure you can work efficiently and in maximum
safety.

5.3.1 Seat adjustment

The seat is held by four
screws (1) which have to be
loosened for changing the
position of the seat which is
done by sliding it along the
slots in the base.
When you have got in a com-
fortable position, fully tighten
the four screws.
EN
14
4.12) or the drive lever
1
1
5.3.2 Refuelling
NOTE
The oil and fuel to use are indicated in the
engine booklet.
To reach the oil level dipstick, lift
up the seat and open the hatchway
beneath.
With engine stopped, check its oil
level which must be between the
MIN and MAX marks on the dip-
stick.
Refuelling should be carried out in an
open or well ventilated area with engine stopped. Always re-
member that petrol fumes are inflammable. DO NOT TAKE
FLAMES TO THE TANK MOUTH TO VERIFY ITS CONTENTS
AND DO NOT SMOKE WHEN REFUELLING.
IMPORTANT
Do not drip petrol onto the plastic parts to
avoid damaging them. In the event of accidental spills or leaks,
Refuel using a funnel, but do not
completely fill the tank.
The tank's capacity is about 4
litres.
Tabla de contenido
loading

Tabla de contenido