press the pedal (11) half way and move the lever as per the in-
dications on the label.
Reverse must only be engaged when
the machine is stopped.
Hydrostatic transmission
21. BRAKE PEDAL
In hydrostatically driven models this
pedal is solely for braking and
works on the rear wheels.
22. SPEED CHANGE LEVER
This lever engages drive to the wheels and changes the ma-
chine's forward and reverse speed.
– The machine's forward speed
gradually increases by moving
the lever towards «F».
Reverse is engaged by moving
the lever to «R».
– When the brake pedal (21) is
pressed the lever automatically
returns to the «N» (neutral) posi-
tion.
EN
12
21
22
It can also be moved there manually even without pressing the
brake.
IMPORTANT
When the parking brake (3) is engaged
the speed change lever is locked in the «N» position and can-
not be moved until the parking brake and the pedal have been
released.
23. LEVER TO RELEASE THE HYDROSTATIC DRIVE
This lever has two positions shown on the plate:
Position «A» = Drive engaged: for all operating conditions,
when moving and during cutting;
Position «B» = Drive released: considerably reduces the effort
required for moving the machine manually,
when the engine is not running.
23
IMPORTANT
To avoid damaging the transmission unit,
this operation must be carried out only when the engine has
stopped with the lever (22) at position «N».
23