Dolmar RM-72.13 H Manual De Instrucciones página 75

3.5 FITTING
THE SEAT
Fit the seat (1) onto the
plate (2) using the screws
(3).
3.6 ASSEMBLING
THE MOBILE COVER
Fit the mobile cover follow-
ing instructions supplied.
3.7 FITTING THE GRASS-CATCHER
First of all assemble the frame, joining the upper part (1), including
the opening, to the lower part (2), using the supplied nuts and
9 8
8 10
4
1
2
13 12
1 2
3
2
12
3
2
3
3
11
6
5
6
13
screws (3) and following the indicated
sequence.
Position the angle supports (4) and (5),
respecting the right (R ) and left (L )
sides, and attach them to the frame us-
ing the four self-tapping screws (6).
Insert this frame into the canvas cover,
ensuring that it is correctly positioned
along the base perimeter.
Hook all the plastic profiles to the frame tubes with the help of a
1
screwdriver (7).
Insert the handle (8) into the holes of the canvas (9). Attach this to
the frame using the screws (10), following the indicated sequence,
and complete the assembly screwing the four front and rear self-
threading screws (11).
10
Lastly, fit the stiffening bar (12) on the outside of the frame base,
keeping the flat part towards the canvas and using the nuts and
screws supplied (13) in the sequence indicated.
3 (x 2)
4 - 5 6
6 (x 4) 10 (x 2)
7
11 (x 4) 13 (x 2)
EN 9