Tabla de contenido
EN Dometic TD283
Setting the button and warning tone signals
1.
Select
to open the settings menu.
Display
2. Go to
3. Select or clear the checkbox next to
page 19).
Setting the silent mode
With silent mode activated, the fan (if present) of connected N-BUS devices is switched off and the devices charge at
reduced power to prevent overheating.
NOTE The setting is only available if at least an N-BUS-capable battery charger or solar charge controller
is connected in the N-BUS network.
1.
Select
to open the settings menu.
2. Select or clear the checkbox next to
Setting the date and time
1.
Select
to open the settings menu.
Date&Time
2. Go to
3. Date Enter the day, month and year.
4. Time Enter the hours and minutes.
Setting the language
1.
Select
to open the settings menu.
Language
2. Go to
3. Select the checkbox next to the desired language to choose the language.
The following languages are available:
• Italian
• English
• German
• French
• Spanish
• Dutch
Making basic settings for the battery
For the display to function correctly, the battery type used, the nominal capacity and the corresponding charging
profile must be set for the house battery currently connected.
NOTE If the TEMPRA battery (TLB 100(F)-150(F)) is connected as a house battery, these settings are prede-
fined and cannot be changed.
20
.
BEEP
Silent Mode
.
.
to activate or deactivate the acoustic signal (see
to activate or deactivate the silent mode.
Fig.
on
Tabla de contenido
