Tabla de contenido
EN Dometic TD283
Switching N-BUS-capable devices in the network on and off
NOTE The display can be used to activate and deactivate all N-BUS-capable devices in the network.
Tap the power button for at least 3 s
devices in the network.
Press the power switch to switch on the display and all N-BUS-capable devices in the network
page 17).
Setting values
Select
or
Navigating through the menus
Select
or
Select
to return to the main menu.
Activating or deactivating the Bluetooth function of connected devices
The display can be used to control the Bluetooth modules of the connected N-BUS devices.
NOTE
• Ensure that the connected devices to be controlled have a Bluetooth function.
• The Bluetooth modules of all connected N-BUS devices are controlled simultaneously. The devices
cannot be specifically selected.
1.
Select
to open the settings menu.
2. Select or clear the checkbox next to
N-BUS devices.
18
(Fig.
to decrease or increase the values.
to navigate forwards or backwards in the menus.
Bluetooth
on page 18) to switch off the display and all N-BUS-capable
to activate or deactivate the Bluetooth function of connected
(Fig.
on
Tabla de contenido
