Tabla de contenido
9 Operation
Setting up the display
When the device is switched on for the first time, the initial setup for setting the language, date, time, and type of bat-
tery used is started automatically (refer to the corresponding chapter for more details on the individual settings).
The settings can be skipped and edited or changed at any time in the settings menu.
NOTE For the display to function correctly, the battery type used, the nominal capacity and the corre-
sponding charging profile must be set for the house battery currently connected (see chapter
sic settings for the battery
Using the display
Switching the display on
Press the power switch or tap the touchscreen to switch the display on
Switching the display to standby
NOTE
By default, the display automatically switches to standby mode after 3 min without operation.
The default setting can be adjusted (see chapter
Press the power switch to switch the display to standby
on page 20).
Setting a standby time
(Fig.
on page 19).
(Fig.
on page 17).
Dometic TD283 EN
Making ba
on page 17).
17
Tabla de contenido
