Idiomas disponibles
Idiomas disponibles
Before using the machine, always read the safety warnings.
1. DESCRIPTION
1.1 Description of machine - A
A1. Beans hopper lid
A2. Beans hopper
A3. Grind selector ( ne to coarse)
A4. Cup tray
A5. Steam dial
A6. Hot water spout
A7. Steam wand
A8. Cup grille for espresso
A9. Cup grille for glasses or mugs
A10. Drip tray grille
A11. Drip tray
A12. Drip tray water level indicator
A13. Water tank lid
A14. Water tank pull handle
A15. Water tank
A16. Water softener lter housing
A17. Power cord
A18. Main switch (ON/OFF)
A19. Co ee spout
A20. Co ee grinder outlet (tamping station)
A21. Tamper lever
A22. Co ee grinder funnel access ap
1.2 Description of control panel - B
B1. Ground co ee quantity dial
B2. "1x" button: selection of 1-co ee lter
B3. "2x" button: selection of 2-co ee lter
B4. "OK" button: used to deliver drink / con rm selection /
switch the machine on from standby
colour white: delivery of hot drinks
colour blue: delivery of cold drinks
B5. "Co ee temperature" button
B6. "Hot water" button
B7. Drink selection dial:
• Espresso Cool
• Cold Brew
• Espresso
• Americano
• Co ee
B8. "Steam delivery" indicator
B9. "No water" indicator
B10. "Descale" indicator
B11. Colour orange: clean co ee spout
colour red: general alarm
B12. "Beans hopper" indicator
B13. "Anti clogging" indicator
B14. Pressure gauge
1.3 Description of accessories - C
C1. Porta lter
C2. 1 cup lter
C3. 2 cup lter
Dedicated lters for Espresso Cool
C4. 1 cup lter
C5. 2 cup lter
C6. "Total Hardness Test" strip
C7. Tube brush
C8. Co ee spout cleaning accessory
C9. Cleaning tabs: cleaning aids for the co ee spout
C10. Softballs
C11. Milk carafe
C12. Steam wand cleaning needle
1.4 Optional cleaning accessories recommended
by the manufacturer
For more information, go to www.delonghi.com.
ECO MULTICLEAN
2. PREPARING THE MACHINE
Wash all accessories with warm water and washing-up liquid,
then proceed as follows:
1. Position the drip tray (A11) together with the cup grille
(A9) and drip tray grille (A10) ( g. 1);
2. Remove the water tank (A15) ( g. 2) and ll with clean cold
water, taking care not to exceed the MAX level ( g. 3).
3. Reposition the tank in the machine.
Important: Never operate the machine without water in the tank or without the
tank.
Please note: It is advisable to select the appropriate water hardness setting as soon
as possible, following the instructions in section "7. Settings menu".
3. SETTING UP THE MACHINE
1. Plug into the mains socket. Press the main switch (A18)
( g. 4).
2. Place a container of at least 100 ml capacity under the hot
water spout (next to the co ee spout (A19)) ( g. 5).
3. Press the
button next to the indicator ( g. 6): delivery
will start and then stop automatically. Empty the container.
Before using the co ee maker, the internal circuits of the ma-
chine must be rinsed. Proceed as follows:
4. Attach the porta lter (C1) complete with lter to the ma-
chine: to ensure it is attached correctly, align the handle of
the porta lter with "INSERT" ( g. 7), then turn the handle to
the right until aligned with the "CLOSE" position.
6
:
Cleaner
EAN: 8004399333307
Descaler
