Idiomas disponibles
Idiomas disponibles
PROBLEM
The espresso cream is too dark (delivered
from the spout too slowly)
On completion of the descale cycle, the
machine calls for a further rinse
The machine does not grind the co ee
Changing to a di erent type of co ee
After grinding, the co ee lter is empty
After grinding, there is too much co ee
in the lter
CAUSE
The appliance settings need reviewing
During the rinse cycle, the water tank has
not been lled to the MAX level
Foreign matter has found its way into the
co ee grinder
The funnel of the co ee grinder is
clogged
18
SOLUTION
Remove the porta lter (C1) and repeat
the co ee-making steps, bearing in the
mind the indications given in sections "4.
Making co ee" and "4.2 Step 2 - Tamping"
Repeat the rinse cycle (see section "11.
Descaling")
Turn the selector to 15 and remove all
beans with a vacuum cleaner, complete-
ly emptying and cleaning out the beans
hopper(A2). If the problem persists, con-
tact customer services
• It is advisable to ll the beans hop-
per(A2) only with the quantity of
beans e ectively needed
• To empty the container, remove the
contents using a vacuum cleaner, or
grind all the beans left in the container
until completely empty
• Introduce the new beans
• If the amount of ground co ee does
not give the perfect dose, proceed to
set up the machine as for rst-time use
Clean as described in section
"8.3 Cleaning the "Smart tamping sta-
tion"". If the problem persists, access the
funnel by opening up the relative ap
(A22) and clear the blockage using the
tube brush
→
