Warning Out Terminal; Rs-232C Interface - Sony SVT-5050P Manual De Instrucciones

When Using One Unit as a Master VCR
to CLOCK SET OUT
to CLOCK SET IN
to CLOCK SET OUT
to CLOCK SET IN
1
Press MENU until the SW OUT/CLOCK
ADJUSTMENT display appears on the screen.
< >
SW OUT
F I ELD
T I M I NG
<
CLOCK ADJUSTMENT
T I ME ADJ.
OPERAT I ON
2
Press $ SHIFT to move the flashing to TIME
ADJ. and set the time for clock setting by pressing
REC/PLAY SPEED +/–.
3
Press $ SHIFT to move the flashing to
OPERATION and set to IN or OUT by pressing
REC/PLAY SPEED +/–.
OUT: for the VCR to be used as the master VCR.
IN: for other VCRs.
4
Press SEARCH to return to the normal display.
5
When using an external switch:
When you turn the switch on and an input signal is
received at the CLOCK SET IN terminal, the
clocks of all the connected VCRs will be set to the
time adjusted in step 2.
When using one unit as the master VCR:
When the clock of the master VCR comes to the
time adjusted in step 2, the signal will be output
from the CLOCK SET OUT terminal to set the
clocks of the other connected VCRs.
Master VCR
0 1
F I ELD
>
0 1 : 0 0
I N

WARNING OUT Terminal

This terminal will help you to know when something
wrong has happened to the VCR during recording.
The VCR outputs a signal from WARNING OUT
terminal.
COM terminal
Recording stops.

RS-232C Interface

When a personal computer is connected via RS-232C
interface (SVT-RS1 Computer Interface Board), set
the baud rate on the OTHER screen.
1
Press MENU until the OTHER display appears on
the screen.
< >
O T H E R
R E P E A T
T A P E E N D
A L A R M M O D E
R S - 2 3 2 C
2
Press $ SHIFT to move the flashing to RS-232C
and set the baud rate (1200, 2400, 4800 or 9600
bps) by pressing REC/PLAY SPEED+/–.
3
Press SEARCH to return to the normal display.
WARNING OUT terminal
5 V
0 V
Press operation
button.
M O D E 1
- 3 M
Y
1 2 0 0
37