Transfer arm option
WARNING: Always lock the transfer arm when transferring an occupant or disinfecting the recliner to
avoid the risk of injury. Occupant may be able to operate the transfer arm if not locked, which may cause
bodily harm.
The transfer arm allows the operator to perform a pivot or lateral transfer.
To open the transfer arm:
1. Push down on the transfer arm while you press the transfer arm release button
(Figure 1)
2. Grasp the transfer arm from the front and rotate back until it stops.
To close the transfer arm:
1. Grasp the transfer arm and rotate forward into the locked position.
2. Push down on the transfer arm until you hear it click into place.
3. Always pull up on the transfer arm after being placed into locked position to ensure
proper lock.
IV pole/bracket
Adjustable with infinite height positions. IV pole has two hooks. Max load per hook is 10 lb
(4.54 kg).
To adjust the IV pole height:
1. Push up on the top black collar
to desired height.
2. Release the top black collar to lock the IV pole into place.
NOTE: Do not twist the lower black ring
To remove or install the IV pole:
To remove the IV pole, twist the IV pole
•
To install the IV pole, insert the IV pole into IV bracket twist to lock.
•
Cushion wedge
The removable cushion wedge provides additional surface for arm support. The cushion wedge
also helps to close the gap between the inside of recliner arms for smaller occupants.
Head pillow
The removable pillow offers head support.
Head protector flap
to unlock.
(J) (Figure 2)
(K) (Figure 2)
to release lock and adjust the IV pole
to raise and lower the IV pole.
(L) (Figure 2)
(18)
Unity Recliner Manual GD-00010066_Rev-D - 02/24
and remove.
(D)