ADURO P5 Lux Manual De Usuario página 46

5.3 Temperature control
Push the "+" button to select the room temperature setting and use the buttons "+" and "–" to increase or
decrease the temperature. Then hold the "ON/OFF" button to turn on the stove. Now, use the "–" button to
select the heat level. The higher the heat level, the faster the desired temperature will be reached. Once the
temperature is reached, the stove will regulate the heat level up and down automatically to maintain the
chosen temperature.
When the stove is running by room temperature, it will automatically use the temperature sensor placed on
the lower back part of the stove. The remote control also contains a temperature sensor that can be used
instead. Using the sensor on the remote makes it possible to read the room temperature further away from
the stove and it thus gives a more accurate reading. The sensor on the remote is activated via the remote by
choosing OK -> USER SETTINGS -> CHOOSE PROBE -> ON BOARD (on stove) / REMOTE (on remote).
If it is desired to run the stove at a fixed heat level without temperature control, set the temperature at for
instance 10° higher than the room temperature and then set the stove at the desired heat level.
5.4 Control panel
The control panel is located on the side of the stove and is used for controlling the basic functions of the
stove.
1: ON/OFF BUTTON. Hold the button, and the stove will switch on/off.
2: HEAT LEVEL BUTTON. Press the button to increase/decrease the heat level.
5.5 Pairing the stove with the remote control
The remote is already paired with the stove upon delivery. If the remote does not automatically connect to
the stove, please use the following guide:
•
Make sure your stove is plugged in.
•
On the remote control, press the buttons "OK" and "ON/OFF" until the radio id menu appears.
•
At this point press the button "–". The word "NEW" appears on the screen.
•
Press the button "OK" and select the desired channel number (+ and – buttons).
•
Press the buttons 1 and 2 on the emergency control panel until all the LEDs begin to flash.
•
At this point press the button "OK" on remote control to confirm the pairing.
5.6 Wi-Fi connection
To connect to Wi-Fi, it is necessary to download the Aduro Pellet Stove app, which is available
in Google Play and in App Store. Then, follow the guidelines for establishing Wi-Fi connection
on our website: adurofire.com/aduro-pellet-stoves/frequently-asked-questions/
46