ADURO P5 Lux Manual De Usuario página 45

4.4 Draft
Fumes heat up during combustion, increasing their volume. Their density is therefore lower than the one of
the surrounding colder air.
This difference between the inside and outside temperatures of the chimney results in the chimney draft.
The draft must be stronger than the fume circulation resistance so that all exhaust fumes generated during
combustion inside the stove are drawn upwards through the outlet and the flue pipe. Many weather
conditions affect the vent pipe functioning, such as rain, fog, snow, and wind being the most important as it
can create negative pressure.
Read more at adurofire.com.
Excess draft causes an increase in the combustion temperature and consequently a loss in stove efficiency.
At the same time the high fuel temperature, due to an excess amount of oxygen, wears down the
combustion chamber sooner than expected. A high chimney draft may also result in vibrations from the
exhaust fan.
On the other hand, poor draft slows down combustion resulting in a decrease in the stove temperature, fume
spillage inside the room, a loss of stove efficiency and dangerous build-up of soot in the flue pipe.
5.1 Control
The stove can be operated with the remote control, Aduro pellet stove app or the most basic functions via
the control panel on the side of the stove.
Ensure that the stove is connected to a power source and to the chimney. We recommend using the remote
for the initial start and setup of the stove.
5.2 Remote control
The remote shows basic information about the stove's operation and has 5 buttons for various settings (see
illustration below).
You can define the desired room temperature and/or the heat level (1-5), at which the stove should start.
5. Using the stove
Room temperature setting, change menu
Heat level setting, change menu
Back, exit
Confirm, menu
ON/OFF, exit
45