QJMOTOR SRT 700 Manual Del Usuario página 37

Notice
Check the tire pressure when the tires are "cold"
before riding.
The depth of the pattern on the tire
crown pattern should be greater
than or equal to 0.8 mm. If the wear
is less than 0.8 mm, a new tire
should be replaced.
Warning
Do not attempt to repair damaged tires. Wheel bal-
ance and tire reliability may deteriorate.
Improperly inflated tires will cause abnormal tread
wear and threaten safety. Under-inflating tires can
cause tires to slip, or tires to disengage, or even
damage the rim, which can lead to a loss of control
and a hazard.
Driving a motorcycle with excessive tire wear is a
dangerous thing that is bad for ground adhesion
and driving.
Seat cushion removal
Insert the key into the key hole
1 at the bottom left of the seat
cushion, and turn the key clock-
wise to open the seat cushion,
pull up the front of the passen-
ger seat cushion, and push it
forward to remove the passen-
ger seat cushion.
After removing the passenger
seat cushion, remove the driver
seat cushion fixing screw 2 to
remove the driver seat cushion.
To install the passenger seat
cushion, push the seat cushion
from the back to the front so
that the hook 3 on the back of
the seat cushion is stuck on the
limit plate 4 on the frame, and then the lock hook 5
is aligned with the lock hole 6, and press down
lightly The passenger seat cushion can be attached
to the passenger seat cushion.
32