Idiomas disponibles
Idiomas disponibles
1. Rip scale indicator
2. Rip scale
3. Fence latch
4. Fence adjusting knob
5. Bevel scale
6. Bevel locking lever
7. Height adjusting wheel
8. Switch cover
9. Carrying handle
10. ONE-KEY
indicator
TM
11. Extending rip fence
12. Rip fence
13. Push stick
14. Blade guard
15. Riving knife and blade guard assembly
16. Anti-kickback pawls
17. Riving knife release lever
18. Anti-kickback pawl storage
19. Dust chute
20. Miter gauge storage
21. Riving knife without guard / riving knife storage
22. Blade wrench / blade wrench storage
23. Miter gauge
24. Fence lock
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For spe-
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
Always remove battery pack before
WARNING
changing or removing accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
Only use accessories specifically
WARNING
recommended for this tool. Others
may be hazardous.
If any parts are damaged or missing, do not oper-
ate this tool until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
Do not attempt to modify this tool or create acces-
sories not recommended for use with this tool.
Any such alteration or modification is misuse and
could result in a hazardous condition leading to
possible serious personal injury.
Do not insert to battery pack until assembly is
complete. Failure to comply could result in ac-
cidental starting and possible serious personal
injury.
Do not lift the saw without help. Hold it close to
your body. Keep your knees bent and lift with
your legs, not your back. Ignoring these precau-
tions can result in back injury.
This product requires assembly.
• Carefully lift saw from the carton and place it on a
level work surface.
NOTE: This tool is heavy. To avoid back injury, keep
your knees bent and lift with your legs, not your back,
and get help when needed.
• If tool is shipped with a battery installed, remove
the battery pack.
• Remove any packaging and zip ties.
• Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected the tool, identified all loose parts,
and satisfactorily operated the tool.
Mounting the Table Saw
Ensure the saw is on a stable,
WARNING
level surface before use.
For extra stability, mount the table saw to workbench
using the mounting holes in the in the frame. Insert
screws at an angle through the table saw frame.
The Milwaukee Table Saw Stand can also be used.
7
Unpacking
