GreenWorks G48PHTII Manual Del Operario página 9

EN
7 TROUBLESHOOTING
Problem
The motor does
not start when
you push the
trigger.
The machine
smokes during
operation.
There is too
much noise
and/or vibration
during opera-
tion.
8 TECHNICAL DATA
Voltage
Blade speed
Blade length
Cutting capacity
Measuered sound
pressure level
Guaranteed sound
power level
Vibration
Uncertainty
Possible cause Solution
Make sure that
The battery is
you tightly in-
not installed
stall the battery
tightly.
in the machine.
The battery is Charge the bat-
out of power. tery.
1. Immedi-
ately stop
the ma-
chine.
The machine
2. Remove
has damage.
the battery.
3. Contact a
service
center.
1. Stop the
machine.
2. Remove
the battery.
The parts are
3. Inspect for
loose.
damage.
4. Check and
tighten
loose
parts.
Do not use the
The parts have machine and
damage. contact a serv-
ice center.
The blade lacks Lubricate the
lubrication. blade.
48 V
-1
3000 (±10%) min
510 mm
25.4 mm
85 dB(A), K =3 dB(A)
PA
96 dB(A)
2
< 2.5 m/s
2
1.5 m/s
English
Battery model
Charger model
9 WARRANTY
(The full warranty terms and conditions can be found
on Greenworks website )
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10 EC DECLARATION OF CONFORMITY
Name and address of the manufacturer:
Name: Globe Technologies Europe GmbH
Address: Brunnenweg 17, 64331 Weiterstadt, Ger-
many
Name and address of the person authorised to compile
the technical file:
Name: Ralf Pankalla
Address: Brunnenweg 17, 64331 Weiterstadt, Ger-
many
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construc-
tion:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
6
G4824B2, G4824B4, G4824B5,
G4824B4+ and other BAM ser-
ies
G4824C4, CAM821 and other
CAM series
Hedge Trimmer
PTEB0001 (G48PHTII)
See product rating label
See product rating label